[1]李树谦,刘子苑,韩 超,等.大孔径规则多孔介质强化石蜡熔化的实验研究[J].南京师大学报(自然科学版),2022,45(03):20-26,34.[doi:10.3969/j.issn.1001-4616.2022.03.004]
　Li Shuqian,Liu Ziyuan,Han Chao,et al.Experimental Study on Enhancing Paraffin Melting Rate with the Large-Aperture Regular Porous Media[J].Journal of Nanjing Normal University(Natural Science Edition),2022,45(03):20-26,34.[doi:10.3969/j.issn.1001-4616.2022.03.004]
点击复制

大孔径规则多孔介质强化石蜡熔化的实验研究()
分享到：

《南京师大学报（自然科学版）》[ISSN:1001-4616/CN:32-1239/N]

卷:
第45卷
期数:
2022年03期
页码:
20-26,34
栏目:
物理学
出版日期:
2022-09-15

文章信息/Info

Title:
Experimental Study on Enhancing Paraffin Melting Rate with the Large-Aperture Regular Porous Media
文章编号:
1001-4616(2022)03-0020-07
作者:
李树谦1; 3; 4; 刘子苑1; 3; 4; 韩 超1; 3; 李桐栋1; 付建航1; 张强武2
(1.河北水利电力学院土木工程学院,河北 沧州 061001)(2.河北科技大学建筑工程学院,河北 石家庄 050018)(3.河北省数据中心相变热管理技术创新中心,河北 沧州 061001)(4.沧州市储热及低品位余热利用型电磁供热技术创新中心,河北 沧州 061001)
Author(s):
Li Shuqian1; 3; 4; Liu Ziyuan1; 3; 4; Han Chao1; 3; Li Tongdong1; Fu Jianhang1; Zhang Qiangwu2
(1.School of Civil Engineering,Hebei University of Water Resources and Electric Engineering,Cangzhou 061001,China)(2.School of Architecture,Hebei University of Science and Technology,Shijiazhuang 050018,China)(3.Hebei Technology Innovation Center of Phase Change Thermal Management of Internet Data Center,Cangzhou 061001,China)(4.Cangzhou Technology Innovation Center of Thermal Storage and Electromagnetic Heating with Low Grade Waste Heat,Cangzhou 061001,China)
关键词:
大孔径规则多孔介质; 石蜡熔化; 固-液界面; 温升速率; 自然对流
Keywords:
the large-aperture regular porous media; paraffin melting; solid-liquid interface; temperature rising rate; natural convection
分类号:
TK124,TK02
DOI:
10.3969/j.issn.1001-4616.2022.03.004
文献标志码:
A
摘要:
强化相变材料熔化是提高与之相关的储热装置效率的有效途径,区别于既往常见的泡沫金属强化相变材料熔化,本文以黄铜为材料设计加工了一种大孔径规则多孔介质,并将其与石蜡和PC圆管组成实验段. 以只填充石蜡的实验段作为对照,通过可视化实验和典型位置处瞬时温度的测量考察了该类型多孔介质强化石蜡熔化的作用效果和机理. 结果表明:填充大孔径规则多孔介质实验段内的石蜡在熔化过程中无明显的糊状区. 此外,与只填充石蜡的实验段相比,填充大孔径规则多孔介质的实验段内固-液界面向上移动的高度较高且温升速率显著较快. 再者,该类型多孔介质可显著强化距离加热壁面较远的测点C3a的自然对流传热,从而使其温度在500 min后高于距离加热壁面最近的测点C1的温度.
Abstract:
It is an effective way of improving related thermal storage equipment to enhance phase change materials melting rate. In the aspect of pore structure,it is different between the common foam metal and the large-aperture regular porous media developed by us,which is made of brass and is part of the test section together with paraffin and PC circular tube. Compared with the test section with only paraffin,the effect and mechanism of the large-aperture regular porous media on paraffin melting rate enhancement was investigated through visualization experiment and transient temperature measurement of typical locations. The results show that,there is no mushy zone during paraffin melting process for the test section with the large-aperture regular porous media. Additionally,the moving height of solid-liquid interface is larger and temperature rise is faster for paraffin in the test section with the large-aperture regular porous media compared with the test section with only paraffin. Also,the large-aperture regular porous media could significantly enhance natural convection at the location of measuring point C3a where it is farther from the heating surface,and the temperature at this location was higher than that of the nearest measuring point C1 after 500 minutes.

参考文献/References:

[1]郭茶秀,黄云浩,崔丽,等. 电子元器件相变冷却的数值传热研究[J]. 电子器件,2008(5):1553-1558.
[2]陶汉中,刘士琦. 热管式组合工质蓄热系统换热特性的数值模拟[J]. 可再生能源,2018,36(12):1890-1896.
[3]吴学红,姜文涛,翟亚妨,等. 内翅式套管相变蓄热器性能研究[J]. 可再生能源,2016,34(9):1369-1374.
[4]LIU J J,XU C,JU X,et al. Numerical investigation on the heat transfer enhancement of a latent heat thermal energy storage system with bundled tube structures[J]. Applied thermal engineering,2017,112(5):820-831.
[5]FENG S S,SHI M,LI Y F,et al. Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam[J]. International journal of heat and mass transfer,2015,90:838-847.
[6]FERNANDES D,PITIÉ F,CÁCERES G,et al. Thermal energy storage:“How previous findings determine current research priorities”[J]. Energy,2012,39:246-257.
[7]LI Z,WU Z G. Numerical study on the thermal behavior of phase change materials(PCMs)embedded in porous metal matrix[J]. Solar Energy,2014,99:172-184.
[8]杲东彦,陈振乾,陈凌海. 开孔泡沫铝内石蜡融化相变过程的可视化实验研究[J]. 化工学报,2014,65(S1):95-100.
[9]ZHAO C Y,LU W,TIAN Y. Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials(PCMs)[J]. Solar energy,2010,84(8):1402-1412.
[10]MARTINELLI M,BENTIVOGLIO F,CARON-SOUPART A,et al. Experimental study of a phase change thermal energy storage with copper foam[J]. Applied thermal engineering,2016,101:247-261.
[11]盛强,邢玉明,王泽. 泡沫金属复合相变材料的制备与性能分析[J]. 化工学报,2013,64(10):3565-3570.
[12]吴志根,陶文铨. 金属矩阵材料在相变蓄热中的强化换热分析[J]. 工程热物理学报,2013,34(2):307-309.
[13]MOFFAT R J. Describing the uncertainties in experimental results[J]. Experimental thermal and fluid science,1988,1(1):3-17.
[14]郑章靖,徐阳,何雅玲. 梯级多孔介质强化管壳式相变储热器性能研究[J]. 工程热物理学报,2019,40(3):605-611.

备注/Memo

备注/Memo:
收稿日期:2020-11-18.
基金项目:国家自然科学基金资助项目(51976052)、河北省自然科学基金资助项目(E2020412176)、河北省高等学校科学技术研究重点资助项目(ZD2019032)、2020年河北省高等学校基本科研业务研究项目.
通讯作者:李桐栋,副教授,研究方向:流固耦合研究. E-mail:litongdongcz@163.com
更新日期/Last Update: 2022-09-15